What size is a 3/8 spanner in MM?
Imperial and Metric Spanner Sizes
| BOLT DIAMETER (INCHES) | AF SPANNER SIZE (INCHES) | SPANNER SIZE (MM) |
|---|---|---|
| 1/4 INCH | 7/16 INCH | 11.11 MM |
| 5/16 INCH | 1/2 INCH | 12.7 MM |
| 3/8 INCH | 9/16 INCH | 14.29 MM |
| 7/16 INCH | 5/8 INCH | 15.88 MM |
What is a 3/8 socket in MM?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
| 3/8″ | 14mm | 9/16″ |
What is 3/8 as a metric?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 3/8″ | 0.375 | |
| 10mm | 0.394 | |
| 13/32″ | 0.406 | |
| 11mm | 0.433 |
What size is a 3/8 spanner?
| Bolt dia. | AF spanner size inches | Spanner size MM |
|---|---|---|
| 3/8 inch | 9.52 mm | |
| 1/4 inch | 7/16 inch | 11.11 mm |
| 5/16 inch | 1/2 inch | 12.7 mm |
| 3/8 inch | 9/16 inch | 14.29 mm |
What is an inch and 3/8 in metric?
Fractional Inches to Decimal Inches and Metric Millimeters
| Inches | Metric | |
|---|---|---|
| Fractional | Decimal | mm |
| . | 0.3740 | 9.5000 |
| 3/8 | 0.3750 | 9.5250 |
| 25/64 | 0.3906 | 9.9219 |
Is 3/8 and 10mm the same?
10mm = just over 3/8 inch.
Is 10mm smaller than 3 8?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 9mm | Just short of 3/8 Inch | 0.35433 Inches |
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
| 12mm | Just short of 1/2 Inch | 0.47244 Inches |
Whats the difference between SAE and metric?
The difference between Metric and SAE sockets is similar to the difference between yards and meters. Metric fasteners are (generally) used on imported cars, and SAE fasteners are (generally) used on domestic (USA) made cars. SAE, or standard size, use the imperial measurement system we invented in the USA.
What’s a size bigger than 3 8?
| Fraction Conversion Table | ||
|---|---|---|
| Fraction | Decimal | Millimeters |
| 3/8 | 0.375 | 9.525 |
| 25/64 | 0.390625 | 9.921 |
| 13/32 | 0.40625 | 10.318 |
Are m10 and 3/8 the same?
That said, they are very close, the 3/8″ bolt is about 0.019″ smaller and the pitch’s are very close so the 3/8 -16 bolt will thread in the 10mm x 1.5 but the 10 x 1.5 bolt will not fit the 3/8 but..
How are metric spanner wrenches shaped to fit?
These wrenches are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components. Lg. Lg. The head pivots to accommodate a range of diameters. These wrenches fit round holes on the circumference of collars, bearings, and other machine tool components.
What’s the difference between a metric and AF Spanner?
Modern metric spanners are marked or sized in the same way as AF but in millimetres,the distance again between parallel faces of an open ended spanner or wrench.They are used on metric threaded fastenings,these have a thread angle of 60 degrees.Metric bolts often have two numbers on the heads,this is a strength rating.
Do you use a spanner on a metric bolt?
Because you will need to use a spanner to turn the thread chaser on to push the threads back in. So making sure that you have the correct thread chaser before you start using a spanner on it is a really good idea. Some metric and Imperial threads are similar, they’re close but not quite.
How many inches are there in a Whitworth Spanner?
Whitworth (inch). BSF. (inch). Actual Metric. (mm) Actual Inches (decimal) 1/8 3/16 8.64 .340 3/16 1/4 11.3 .445 1/4 5/16 13.34 .525 5/16 3/8 15.24 .6