Blog

How do I configure my Motorola SBG6580 modem?

How do I configure my Motorola SBG6580 modem?

Configuration

  1. Enter admin in the Username field.
  2. Enter motorola in the Password field.
  3. Click the Login button. The Status Connection page appears.
  4. Click the Wireless link on the top menu.
  5. On the Wireless 802.11 Radio page:
  6. Click the Primary Network button on the left-hand menu.
  7. On the 802.11 Primary Network page:

How do I change the settings on my Motorola Surfboard SBG6580?

To access the settings of your WiFi modem:

  1. Open a web browser (Internet Explorer, Firefox, Safari, Chrome, etc.)
  2. In the address bar, type: 192.168.0.1 [Then press the Enter Key]
  3. Enter Username*: admin.
  4. Enter Password*: motorola.
  5. Click Login.
  6. Click the Wireless menu and then click on Primary Network Settings.

Does surfboard SBG6580 have WPS?

The SBG6580 supports two types of WPS: PIN Entry and PBC (Push Button Connection). This document includes the following sections: To Enable WPS PBC. To Establish WPS Push-button Connection.

How do I fix my Motorola SBG6580?

Power Cycle Devices Unplug the SBG6580 from the power, wait 10 seconds, then plug back into power. Once the SBG6580 is full on and the top four LED lights are solid, power cycle all effected client devices. If this does not resolve the issue, proceed to the section Troubleshooting Wi-Fi Connections.

How many devices can connect to Motorola SBG6580?

By default, the SBG6580 operates as a gateway, and provides Internet access for multiple devices (up to 245 devices), connecting to the SBG6580 gateway. When operating as a gateway, the SBG6580 serves as a modem and a router and keeps the devices in the Local Area Network (LAN) hidden.

What is the IP address for Motorola Surfboard SBG6580?

192.168.0.1
Enter http://192.168.0.1 into the address box. NOTE: By default the LAN IP address is 192.168. 0.1. If the default address has been changed, enter the custom address in the address box.

How do I enable WPS on my Motorola router?

Click on Advanced at the top right hand corner. On the new page that opens, click on Wireless, and then click on WPS Radius WEP. There is an option to enable WPS on the first line. Click Enable, and then click Save.

How do I know if my motorola modem is working?

A solid light indicates the modem is powered on. When the light is flashing the modem is scanning for a receive channel connection. A solid light indicates the channel connection is acquired. When the light is flashing, the modem is scanning for the send channel connection.

What is the default password for motorola SURFboard SBG6580?

When attempting to access the SBG6580 configuration menu, the gateway prompts for a username and password. By default, the username is admin, and the password is motorola.

How do I Turn On my SBG6580 modem?

Verify that the coaxial cable is connected to the cable outlet. Connect the other end of the coaxial cable to the Cable connector on the modem. Hand-tighten the connectors to avoid damages. Plug the power cord into the power connector on the SBG6580. Plug the power cord into the electrical outlet. This turns on the SBG6580.

What is the username and password for SBG6580?

When attempting to access the SBG6580 configuration menu, the gateway prompts for a username and password. By default, the username is admin, and the password is motorola . However, the gateway’s admin account username and password can be changed.

Is the SBG6580 surfboard extreme a good product?

I ordered this very inexpensive, but quality product, received it earlier than scheduled, at the first issue I emailed seller and got a reply from Tommy later that same day, and the issue was resolved and I was up and running.

When to postpone installation of the SBG6580?

Postpone SBG6580 installation until there is no risk of thunderstorm or lighting activity in the area. disconnecting it from the SBG6580 rear panel. To prevent overheating the SBG6580, do not open the unit or block the ventilation holes on the sides of the unit.