How often should aerial lifts be inspected?
Aerial lifts must be inspected annually by a qualified 3rd party vendor to ensure that the lift is maintained properly and is safe for use. Upon completion of the inspection, an inspection sticker will be issued and should be affixed visibly on the lift.
How do you inspect an aerial lift?
Pre-Start Inspections Review the aerial lift’s components. Check the oil, hydraulic, fuel and coolant levels, and look for fluid leaks. Assess the wheels and tires, battery and charger, controls, horns, lights, backup alarms, steering, and brakes, too. Next, look at the lift components.
Does OSHA require aerial lift certification?
The simple answer is no. Currently, there are no requirements set forth by OSHA or the manufacturers of aerial lifts for operators to be certified. According to OSHA Subpart L, 1926.453(a)(2), “only authorized persons shall operate an aerial lift.”
What does OSHA consider a aerial lift?
Per OSHA, a scissor lift is a mobile scaffold for which the platform only moves vertically. An aerial lift is any vehicle-mounted work platform that can move vertically and/or horizontally. Some aerial lifts can even rotate around a vertical axis.
When should an inspection be performed on the lift?
Annual inspections must be performed on the aerial platform no later than thirteen (13) months from the date of the prior annual inspection, and the inspection shall be in accordance with items specified by the manufacturer for an annual inspection.
Can you walk under a boom lift?
Any tools or materials falling from an aerial lift can cause you serious injury if you’re standing beneath them when they fall. It’s best to give the boom a wide clearance when walking or working nearby. Never stand directly underneath the boom or basket for any reason.
Do you need a spotter for aerial lift?
Many outdoor jobs, such as construction sites, can benefit from having spotters, and any job that uses aerial lifts, earthmovers, and other heavy equipment should have a spotter. Spotters are essential when working around overhead structures, steel columns, and live power lines.
What is the OSHA standard for scissor lifts?
While there are no OSHA provisions that specifically address scissor lifts, they do meet the definition of a scaffold (§1926.451 – general requirements for scaffolds). Employers must therefore comply with the other applicable provisions of Subpart L when using scissor lifts.
At what depth of a trench does OSHA require fall protection?
Trenches 5 feet (1.5 meters) deep or greater require a protective system unless the excavation is made entirely in stable rock. If less than 5 feet deep, a competent person may determine that a protective system is not required.
How often is aerial lift training required by OSHA?
Every three years
1) How often is aerial lift training required? Per OSHA aerial lift training requirements, all new employees require aerial lift and scissor lift training. Every three years, your employees need to be recertified.
Does OSHA require annual inspections on scissor lifts?
Does a scissor lift require a daily inspection and operator evaluation as part of the OSHA powered truck certification? This was our answer: Scissor lifts are covered under the OSHA construction rules for scaffolds. They do not fall under OSHA’s Powered Industrial Truck regulations (29 CFR 1910.178).
What’s involved in an OSHA inspection?
Steps in an OSHA Inspection Pre-Inspection – OSHA Compliance officers gather information on the workplace including inspection history, appropriate personal protective equipment (PPE), and testing instruments to measure possible safety hazards.
What are the requirements of OSHA?
General Industry Requirements. To earn OSHA’s certificate in Public Sector Safety & Health Fundamentals for General Industry, participants must complete a minimum of seven (7) courses, comprised of required and elective courses, that include a minimum of 68 instructional hours of training through OTI Education Center courses.
What are OSHA safety guidelines?
OSHA guidelines are voluntary recommendations for compliance with general workplace safety and training initiatives where standards have not been defined. General OSHA guidelines appear in OSHA’s Safety and Health Program Management Guidelines.
What are the rules for OSHA?
General Safety Rules For All Businesses. OSHA requires covered employers to maintain a workplace that is free of hazards that they know or should know about, and that are causing or are likely to cause death or serious physical injury.