Blog

What tool is needed to shut off a main gas valve?

What tool is needed to shut off a main gas valve?

Take a 12-inch or larger adjustable wrench, and turn the valve 1/4 turn in either direction, until the valve is crosswise to the pipe. (See Diagram B) TIP: Keep a 12-inch or larger adjustable wrench with your emergency supplies, or next to your valve.

What type of tool is used to shut off the gas flowing to the gas meter?

An Excess Flow Valve, or EFV, is a safety device installed on natural gas distribution pipelines to automatically close and restrict the flow of natural gas in the event an underground pipe is damaged or if there is a significant increase in the flow of natural gas to the meter.

What is a 4 in 1 tool?

The On Duty 4 in 1 Emergency Tool: 1. A light-weight, heavy duty, easy-to-use tool which Shuts off Gas, Shuts off Water, Pries Open Doors and Digs through Debris. This tool will help you prepare for any emergency.

Can I turn my gas back on myself?

Once the valve is turned off, do not turn it back on by yourself. It must be turned on by a gas company technician. The gas company will likely perform a pressure test on the system and relight all pilot lights in the house as part of turning the gas back on.

Is it safe to turn off gas valve?

In an emergency, your gas can be turned off at the main gas service shutoff valve. Do not shut off the gas unless you smell gas, hear gas escaping, see a broken gas line or suspect a gas leak. If you shut off the gas, there may be a considerable delay before PG&E can turn your service back on.

Where do I turn off the gas in my house?

Locate your main gas service shutoff valve. It’s usually the first fitting on the natural gas supply pipe coming out of the ground next to the meter. With a wrench, turn the lever in either direction until it is crosswise to the pipe. Once the gas is turned off, leave it off.

When can the gas company shut off gas?

It may be against the law for your utility company to stop your heat this winter. It is illegal for your gas or electric company to turn off your services if you need them for heat between November 15 and March 15 and you cannot afford to pay your bills.

Does gas turn off when pilot goes out?

The pilot light provides a small flame that ignites the gas needed to operate the appliance. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out. The fail-safe device is comprised of a thermocouple.

Where should a gas shut off valve be located?

The gas meter and gas service shutoff valve is usually located on the side or in front of the building. If the building has a breezeway, it could be located there.