Useful tips

Can soft-close toilet hinges be repaired?

Can soft-close toilet hinges be repaired?

Tip: If your soft-close toilet seat’s hinges are not adjustable, you can replace them with a new set, which costs less than $15 USD, to make your seat work like new again. You could also replace the entire seat for around $50 USD or less. Use your fingers to push the hinge dampers back into the hinge assembly.

Can you replace toilet seat hinges?

They serve to raise and lower the seat. Over time, these hinges break or wear out, requiring replacement. If your toilet seat hinges are broken, you do not need to change the whole toilet seat, only the hinges. With the right tools and spare parts, you can easily replace your toilet seat hinges.

Are toilet seat hinges universal?

The toilet seat hinges are not universal. In this type of toilet seat fixing, you have to put bolts on the toilet pan from underneath and then tighten it from the top.

How do soft-close toilet seat hinges work?

A slow close toilet seat is basically one that closes on its own as soon as you start to push it down. Gravity controls it but special, tensioned hinges control the gravity. This is where theslowpart comes in so there’s no slamming down.

Why does my soft close toilet seat not stay up?

The most common reason toilet seats won’t stay up is because the seat was installed too far back towards the tank. Unscrew the seat, pull it as far forward as you can, and retighten. This should give your seat the extra angle it needs to stay upright.

Are all toilet seat hinges the same?

Toilet seat hinges all seem the same, but that is not the case. There are standard sizes of toilet seat hinges, but there are multiple sizes from which to choose. Pop the cap where the screws are hidden on the hinges and count the number of screws. It is also wise to measure the distance between the screws.

What is the difference between a top fix and a bottom fix toilet seat?

Types Of Toilet Seat Fittings Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.

Are all toilet seat hinges the same size?

Due to the wide range of brands and shapes of toilets available, there is no one size fits all when it comes to replacing a broken toilet seat. The first thing to measure when shopping for a new toilet seat is the distance between the fixing points. These are the bolts that fix the toilet seat to the pan.

How long should a soft-close toilet seat last?

As I mentioned above, you can usually expect a toilet seat to last for 5 years or more. However, there are several factors that can make it last longer (or not as long).

Why is my soft close hinge not working?

Self-closing cabinet hinges that won’t close might be poorly adjusted. The cabinet door might overlap the neighboring door, be crooked or sit too far out from the cabinet face. Or, the door could be set too far out from the cabinet face, shortening the amount of time the soft-close hinge has to slow down the door.

What kind of hinges do I need for soft close toilet?

Plastic clip-on hinge assemblies are the second main type of hinge assemblies that soft-close toilet seats can have. Look for rectangular plastic pieces that come off the back of the toilet seat, which cover the bolts in the toilet bowl that the seat’s hinges clip onto.

How does a soft close toilet seat work?

Soft-close toilet seats work because they have a special type of hinges that make the toilet seat close on its own very slowly and quietly. Some soft-close toilet seat hinges can be adjusted to make the seat close more slowly.

What does a soft close toilet lid look like?

The damper on the left controls the seat and the damper on the right controls the lid. Soft-close toilet dampers look like cylindrical hinges. Methods for removing them depend on the make and model of the soft-close toilet seat. First, remove the seat and lid from the base of the toilet.

Where are the hinges on a toilet seat?

Look for metal pegs coming up from round plates attached to the back of the toilet bowl, which the hinges on the toilet seat slide onto. If you don’t see this type of hinge assembly, your soft-close seat probably has a plastic clip-on type of hinge assembly.