How do I fix error 5B00 on Canon g2400?

Solution 1: (Get the printer into service mode)

Work out where the STOP button is.
Turn the printer off.
Press and Hold the Power button.
Wait about 2 or 3 seconds – the blue light will be on.
Press the STOP button 6 times.
Let go of the Power button.
The blue light will now start flashing for a while.

How do I get rid of the 5B00 error on my Canon printer?

How to fix Canon printer error 5b00

Step 1: Unplug the device.
Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
Step 3: Hold the power button until the printer starts resetting itself.
Step 4: Wait for the green power light in the printer to turn off.

How do I troubleshoot my Canon ip2700?

Unplug the printer power plug from the mains. Press and hold the printer power button. In a state of pressing the button, turn on your printer again. Wait for 2-5 seconds, press the Resume button 2 times, and release it together with the power button.

How do I reset my Canon iP2770 manually?

Canon Pixma iP2770 Resetter

Turn off the printer without pulling the power cords.
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Then Press Resume button 5 times then let BOTH buttons go.

How do I download canon tool?

Download Canon Service Tool V3400 for maintenance and reset

Download Canon Service Tool V3400.
Set the printer to Service Mode.
Run the Service Tool V3400.exe program.
Select the connected USB port number from the USB PORT.

How do I fix error 5B00 on Canon g3400?

What is Canon error 5B00?

The 5b00 error usually denotes a situation when a user cannot print due to the improper usage of the ink cartridge. If you encounter the Canon printer error 5b00, then you should reset the waste ink counter as shown below. Check the ink level of the system, and read on for other potential solutions.

How do I reprogram my Canon printer?

Press Setup on your Canon device, then navigate to Device settings through arrow keys and press OK. Now, navigate to Reset setting, then press OK, and then navigate to Reset all option. Press OK, then select Yes, and therefore, your device is now reset.