Is 1866 MHz RAM good?
A DDR3 1866 Mhz RAM operates at an 1866 MHz clock, and an 1866 MHz clock cycle takes only 0.525ns to perform, meaning it is just slightly faster than 1600, and it handles most tasks with ease, including gaming. Overall, yes DDR3 1866 memory is enough for gaming.
CAN 1866 Ram connect to 1600?
it should work the issue is, the 1866 will just run at 1600 which means it will be slow for the given latency. your best bet is to put in the 1866 and set its timings to match that on the 1600 and then put in the 1600.
Which is better 1600MHz or 1866MHz?
but bigger is almost always better. Yes, but just to clarify, sometimes low end 1866 MHz memory runs at slower timings to reach the 1866MHz speed. This would effectively be slower for daily use than 1600MHz RAM that had tighter (more respsonsive) timings.
What is a good speed for DDR3?
|Friendly name||Industry name||Peak Transfer Rate|
Can I use 1866Mhz RAM on 1333?
It should work, yes. But, it will run at the lower 1333Mhz speed if your board does not support 1866Mhz.
Does increasing the RAM increase the speed of computer?
Generally, the faster the RAM, the faster the processing speed. With faster RAM, you increase the speed at which memory transfers information to other components. Meaning, your fast processor now has an equally fast way of talking to the other components, making your computer much more efficient.
Can I mix cl9 and cl10 memory?
In a dual channel system, you never want to mix RAM of different speeds, timing, manufacturer, voltage, etc. That is why dual channel memory is sold in MATCHED pairs. You may get lucky and it will work, but it won’t be stable.
How much can 1600mhz RAM overclock?
1600 RAM can OC to 2000.
Is it better to have more RAM or faster RAM?
While RAM speed is important, it’s better to have more RAM than faster RAM. If you’re configuring your PC and have budget constraints, then you might find it economical to buy more RAM that’s rated at a slower speed than fewer, faster modules.
Can I use 1600mhz RAM on a 1333mHz board?
The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.
Can 1600mhz ram work on 1066?
Can you put 1600 Mhz RAM in 1066/800 Mhz RAM Slot – NO It Might not work! If you are upgrading an old PC that has DDR3 1066/800 Mhz RAM slots on its motherboard and planning to upgrade, then you might not be able to find new RAM modules with that frequency. The RAM stick should simply run at the lower clock frequency.
Which is better DDR3 1600 or 1866 MHz RAM?
A DDR3 1866 Mhz RAM operates at an 1866 MHz clock, and an 1866 MHz clock cycle takes only 0.525ns to perform, meaning it is just slightly faster than 1600, and it handles most tasks with ease, including gaming. A device using this speed will use an 1866 MHz wave to transfer data 3,727 times per second. Is it good enough for gaming?
How does ddr3-1866 help AMD FX?
Retaining the reference DDR3-1600 bandwidth numbers, we can see how bumping each of the competitive module sets to DDR3-1866 boosts Sandra’s Memory Bandwidth benchmark. G.Skill’s modules lead at this point, though by an insignificant amount.
How to check the memory speed of DDR3?
The way to check this with DDR3 is as follows: Cycle time in ns = 1000 / (Memory Speed / 2) Bit time in ns = 1000 / Memory Speed. The time to read a single word of data (word is a technical term meaning 64 bits) is given by the Cycle Time multiplied by the CL.
How to calculate the memory speed of Ivy Bridge?
Cycle time in ns = 1000 / (Memory Speed / 2) Bit time in ns = 1000 / Memory Speed. The time to read a single word of data (word is a technical term meaning 64 bits) is given by the Cycle Time multiplied by the CL. The time to read eight words is the Cycle Time multiplied by the CL then add seven lots of Bit Time.