Why is my Zmodo app not working?

Why is my Zmodo app not working?

Zmodo Support – [Troubleshooting] My Zmodo device isn’t working after the app update. Once you have updated your app, you may need to update your Zmodo device to a new firmware (if available). The app will prompt you when a firmware update is available. You can log in using your Zmodo account information.

Does Zmodo work with Iphone?

Zviewer for iOS is the mobile app used to stream live video from your ZMODO H. 264 DVR or IP Network camera, and supports a four channel simultaneous view. Enter the iTunes App Store and download the Zviewer application.

How do I reset my MeShare indoor camera?

Press and hold the factory reset button found on the side of the camera for 10 seconds. The LED light will turn off, then flash red. You will need to set up your camera again after factory resetting it.

Where is the reset button on Zmodo camera?

Most Zmodo wireless cameras do not have a reset button on the camera. Some cameras have a small reset button that you can use a pin to press and hold the reset button for 10-15 seconds until the camera turns off.

How do I reset my Zmodo device?

If you have purchased the standard Zmodo doorbell, the following steps will reset the device:

1. Detach the device from the wall.
2. Lay it on its back with the camera facing upward.
3. Locate the pinhole at the bottom of the device.
4. Take a paper clip and insert it into the hole.
5. When the light blinks green, it has reset itself.

What app do I need for Zmodo camera?

Zviewer for Android is a mobile app used to stream live video from your ZMODO H. 264 DVR or IP Network camera, and supports a four channel simultaneous view.

What cameras are compatible with Zmodo app?

Compatible indoor cameras include Snap PT, Sight 180, Sight 180 C, EZCam, EZCam 1080p, Mini WiFi Camera and 1080p PT Cam. Outdoor cameras now compatible include Sight 180 Outdoor, Outdoor Cam and Outdoor Cam Pro.

How do I reset my Zmodo camera to a new WiFi?

Simply unplug the camera and move it to the new location. As long as you are within range of your wireless router, your camera will automatically reconnect.

Where is the reset button on Victure pc530?

– The RESET key is located at the SD card slot at the lower end of the camera.