How do you reset an Ohaus scale?

How do you reset an Ohaus scale?

  1. Step 1: Press & hold the ON/ZERO button until you see MENU on the display.
  2. Step 2: Release the ON/ZERO button. Display should now read .C.A.L.
  3. Step 3: Press the ON/ZERO button one time (do not hold). Display should briefly flash -C- and then.

How do you change units on Ohaus scale?

Weighing Mode To change units, press and hold SELECT; press M+ Unit until the desired unit icon is displayed.

Is Ohaus a good scale?

Many laboratory professionals choose Ohaus balances for the most accurate measurements in the business. Ohaus scales are highly precise, yet durable enough to stand up to classroom use.

How do you calibrate an Ohaus Ranger 3000 scale?

Note: Be sure units are set to kg before starting calibration.

  1. Turn on the scale. Press and hold Menu until [mMeNU] (Menu) is.
  2. Press Yes to accept. [ SpaN] will then be shown.
  3. Press Yes to accept.
  4. Place the specified calibration mass on the pan.
  5. The display will show [done] if the calibration was successful.

How do you reset an Ohaus Scout?

To clear the stored reference, press and hold MODE until PERCNT is displayed. Press Yes when Clr. ref is displayed. NOTE: Press FUNCTION to view the current reference weight.

How do you calibrate a hand scale?

Calibration 101

  1. Press ON/OFF to turn the scale on, and wait for the scale to stabilize, where it reads 0.0g.
  2. Press and hold the MODE key, the middle button that says “M”, until the display reads “CAL”.
  3. Take one more look at the platform to make sure it is totally bare.

How do you unlock the Ohaus scale?

OHAUS locks the balance pan for shipping. You will find the locking knob on the underside of the balance pan. Turn the knob to unlock the balance.

Where are Ohaus Scales made?

New Jersey
OHAUS Corporation manufactures balances and scales for the laboratory, education, industrial and speciality markets worldwide. With headquarters in Parsippany, New Jersey, United States, OHAUS Corporation has offices in Europe, Asia and Latin America.

What is Ohaus balance?

OHAUS is a worldwide leader that manufactures and markets analytical balances, precision balances, portable balances and industrial electronic and mechanical weighing scales. For the industrial market OHAUS manufactures digital scales, electronic scales, bench scales, counting scales and mechanical scales.

Why is my digital scale not working?

Battery problems are often the cause behind digital scale display and function issues. Use a small, clean paintbrush or cotton swab to sweep the compartment free of dust or debris that might interfere with the battery connection. If that doesn’t solve the problem, try replacing the batteries with fresh ones.

What does the OHAUS adventurer pro balance manual say?

This manual contains installation, operation and maintenance instructions for the Ohaus Adventurer Pro balances. Please read the manual completely before using the balance. 1.1 Description The Adventurer Pro balances are precision weighing instruments that will provide you with years of service if properly cared for.

Where can I find the OHAUS service manual?

TABLE OF CONTENTS Ohaus Corporation i Explorer®Service Manual Page No.

How to use the OHAUS Explorer Pro balance?

3.4 Applications 3.4.1 Weighing The Explorer Pro balance contains Weighing, Parts Counting, The Explorer Pro balance is shipped with grams only enabled. Animal Weighing, Percent Weighing, Check Weighing, G/N/T, The balance can be used immediately after calibration has Statistics, SQC, Formulation, Differential Weighing and Filling been performed.

What is the service manual for the adventurer pro?

1.1 INTRODUCTION This service manual contains the information needed to perform routine maintenance and service on the Adventurer Pro TM (AV Models) and Adventurer SL (AS Models) Balances.