Why does my DVD player keep saying no disc?
No-disc errors are usually caused when the DVD or the laser-lens pickup has become dirty and causes the DVD player to not be able to read the DVD. You may need to upgrade to a newer model, most of which accept the latest DVD formats. Clean the laser lens with a DVD laser lens cleaning disc.
How do you fix my DVD player it says no disc?
Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.
Why is my DVD player not working on my TV?
Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .
Why won’t my dvds play on my DVD player?
Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
Can you connect an old DVD player to a new TV?
Yes, you can connect an old DVD player to a new TV as long as your DVD player and TV have either HDMI ports or audio and video ports. Some old DVD players have both so you shouldn’t have any problem hooking it up with your new TV.
How do I connect my RCA DVD player to my HDMI TV?
Connect the component or composite video cables and audio cables (white and red RCA) to the back of your DVD. Take the other side of the cables, a total of 5, and connect them in the corresponding place on the video converter. Use an HDMI cable to connect the converter box to the TV.
How do I connect my old DVD player to my Samsung Smart TV?
Connect the cable to the back of the TV. Depending on the type of cable you are using to connect your DVD player, connect it to the proper port on the back of the Samsung TV. HDMI cables plug into the port labeled “HDMI”. Component and composite cables will connect to the color-coded ports on the back of the TV.
When does no disc, disc error or insert disc appear on DVD player?
Error: NO DISC, DISC ERROR, or INSERT DISC appears on the display on the DVD player. When the message NO DISC, DISC ERROR, or INSERT DISC appears on the display on the DVD player, check the following: Make sure there is a disc in the player.
Why does my DVD player not read a CD?
After a DVD player has been used for awhile, another common problem is that the laser in the DVD player becomes misaligned, inhibiting its ability to read DVDs. In many cases, DVD players with this problem will still be able to read a CD.
What to do when your DVD player says unknown disc?
Connect your DVD player to the Internet and make use of the “Settings” menu to make it. The latest version of the firmware will be shown in the interface directly. Try to hold down the STOP, PLAY, and POWER buttons on the DVD player to restart the player to resolve unknown disc error.
Why is there no red light on my CD?
A piece of paper the size of a standard CD within the tray can also help, because when the tray closes, one can see the diffused red light on the paper. It is usually bright enough and visible from the other side of the paper. If there is no red light, then the laser has failed.