Trending

How do I fix Hotpoint error code F06?

How do I fix Hotpoint error code F06?

When your Hotpoint washer dryer shows error message F06, you will need to check the door area for any obstructions. Closely inspect the door lock and surrounding areas, removing anything in its way. Once you have cleared any obstructions, try to restart the machine programme.

What is error code F06 Hotpoint?

Hotpoint Washing Machine Error Codes

Error Codes Fault Type
F03 Temperature sensor fault
F04 Blockage or pump issue
F06 Door lock problem
F07 Circuit board and/or heating element fault

How do I fix error code F05 Indesit?

Indesit error F05 or F11

  1. Prepare a towel or a bucket.
  2. On the front side of the machine, open the hatch in front of the drain filter and unscrew the filter.
  3. Drain the excess water and collect it.
  4. Check if there’s a pin, coin or button in the drain and remove it.
  5. Clean and replace the drain filter.

How do I reset my Hotpoint Aqualtis washing machine?

Aqualtis Demostration Mode To activate hold start/reset and the 4th button (bottom one) for six seconds and “D” will be displayed in the spin speed display. To deactivate, press and hold start/reset as power is applied for three seconds.

Why does my Hotpoint Washer say F 05?

F05 means there is a problem with the pump or there is a waste pipe issue. This problem will mean that your washing machine door may not release, leaving your washing trapped inside, or if it is opening, your washing will be sat in a pool of undrained water.

What does error F 05 on a Hotpoint washer?

F05 — Waste pipe blockage or pump issue. Issue: Washing Machines door will not open / the door can be opened but water remains inside the drum. Advice: Please check for blockages in your pump filter (if applicable to model – please see user handbook).

How do you reset a Hotpoint?

How to Reset a Hotpoint Stove

  1. Press the “Clear/Off” button several times until the LCD display shows the clock.
  2. Press “Clear/Off” until the LCD display turns off and the oven powers down.
  3. Disconnect the oven’s power supply at the outlet or circuit breaker and wait 60 seconds.

Is there Hotpoint F06 error code for Whirlpool washing machine?

This Hotpoint F06 error procedure should also be the same for the Indesit F06 error code and Whirlpool F06 error code. In this video I will show you what I did to fix the F06 Washing Machine fault. The 1st two steps I show you are the easiest and simplest and will work most of the time.

What does the error code F02 mean on Hotpoint?

Please select an error code to reveal the fault and a how to fix it yourself. Created with sketchtool. F02 Issue: Washing Machines is not operating – some or all functions are not selectable. Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes.

What is the error code for Hotpoint service?

Digital display codes F01 F02 F03 F05 F06 F07 F08 F09 F11 F12 F15 F16 F18

What does F06 mean on a washing machine?

Errors with the washing machine will result in an error code that appears on the electronic control panel, such as “F06.”. The F06 error indicates an electronic communications problem with the washing machine, which may or may not be something that the user can fix, depending upon individual repair ability.