How do you cut a graphite iron shaft?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How do you cut graphite?
Most people like to use a hack saw with a blade that can cut graphite. Many golf club part manufacturers will sell blades like this, and they are usually easy to install on your current hack saw. A typical hack saw blade is probably not going to do the trick. Many people also use a Dremel-type tool.
Can you cut down graphite shafts?
Graphite shafts need special care to be cut properly. Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
Does shortening a golf shaft make it stiffer?
In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, which is also generally trimmed some amount when building a golf club.
Can you shorten golf club shafts?
Shortening the shaft can make the golf club less flexible. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter. You may need to have the lie angles readjusted after shortening them.
Should I shorten my long irons?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
Can you cut a graphite golf shaft with a hacksaw?
It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
What happens if golf clubs are too long?
When a golf club is too long for you, then you will have to stand very upright. You will not be able to take your normal posture because you will feel as though you do not have control over the golf club. This can affect your entire golf swing, all from just standing a bit too tall.
What is the best graphite shaft?
The best graphite shafts weight around 55 to 65 grams. You can easily find one at Monark Golf. At Monark Golf, you will find a wide selection of high-performance shafts with unique designs as well as our won designed graphite golf club shafts which are perfect for all levels of golfers.
Is graphite better than steel golf clubs?
Clubs with graphite shafts are lighter and stronger than traditional steel-shafted clubs. As a result, the golfer presumably will get better distance and more accuracy with his shot if he swings the club properly.
Although it is possible to use a simple (and sharp) hacksaw to cut down steel shafts, using this tool on graphite shafts can cause splintering or other damage to the shaft. Most clubmakers use a shaft cutter–the same as a small pipe cutter a plumber would use.
How long should a graphite shaft last?
How long will graphite shafts last. If you believe the OOM companies then the shaft and the titanium in head will only last 12 months and you will have to buy the latest and greatest model next year. Reality is a shaft will not wear out, it may contain areas of scratches from being in bag,