What is double fold bias tape?

What is double fold bias tape?

Double-fold bias tape is single-fold bias tape that has been folded in half and pressed with the single folds to the inside. You just sandwich the raw edges of the item you are binding between the folded bias tape and sew it on, making sure you catch both ends in a single line of stitching.

What is the difference between single fold and double fold bias tape?

A Single Fold Bias Tape is a strip of bias cut fabric that is folded so that both edges meet in the middle. A Double Fold Bias Tape is a single fold bias tape that is folded in half.

What is double fold binding?

Double fold binding is a tried-and-true traditional quilt finishing technique. Since double fold binding puts two layers of fabric around the edges of your quilt, it’s wonderfully durable and will protect the hard-working borders of your quilt for many generations!

What is the difference between bias tape and binding?

Now that you’re an expert on the differences between tape, facing, and binding, we’ll cover some tips and tricks for getting a great finish. This is because while bias facing turns the seam allowance inward, bias binding simply wraps around the raw edge.

What can I use if I don’t have bias tape?


  1. Cut Your Fabric on the Bias. Line up your fabric on your cutting mat and fold it diagonally.
  2. Create Your Strips. Measure strips at a width of 2” and mark all across your fabric.
  3. Connect the Strips. Square off the ends of your strips.
  4. Stitch and Trim.
  5. Create the Double Fold.

Can you use double fold bias tape instead of single fold?

Double Fold can be used for hems and necklines like the Single Fold……. it just depends on if you want to see the bias tape from the front of your project or not. But using a contrasting color of Bias Tape can really make a project POP! Like the Bias Tape I used to finish off the edge of these Gauze Swaddle Blankets.

Can I turn double fold bias tape into single fold?

A popular way to make bias tape is to use a tool called a bias tape maker. It has an open end where the fabric slips into the maker that is shaped like a “U.” The fabric spans the whole U and as it goes through the maker the two sides of the U are folded into the center, making single-fold bias tape.

How wide do you cut binding strips?

Cut strips of fabric four times wider than the desired width of the finished binding. For example, if you want a finished binding that’s 1/2 inch wide, cut strips that are 2 inches wide (1/2 inch x 4 = 2).

Can you use double fold bias tape instead of single?

Bias tape basics Double-fold bias tape is generally used to bind an edge, and is visible from the outside of a garment, while single-fold bias tape is used as a narrow facing, which is turned to the garment’s wrong side.

How do you make 1/2 inch bias tape?

Make bias strips the same way as the single fold tape instructions with one important difference. Cut the strips 4 times the width of the bias tape maker. For a 1/2 inch (12mm) bias maker, cut the strips 2 inches wide. Once you have single fold bias tape, fold the tape in half so one side is just wider than the other.

What is single fold bias tape used for?

Single fold bias tape binds both straight and curved edges, adds color accents to garments or finish off quilts, skirts or dresses! Sky is the limit when it comes to using bias tape to finish edges!