Where is the oil filter located in a 2008 Chevy Cobalt?
Lower the car down from the jack stands and floor jack before moving to the engine bay. The cartridge style oil filter is located below a large black cap on the driver side of the engine closer to the front of the vehicle. I recommend buying the OEM GM ACDelco PF457G oil filter since it has excellent reviews on Amazon.
How much oil does a 2007 Cobalt hold?
5.1 quarts
Capacity: 5.1 quarts (with filter)After refill check oil level.
Where is the oil filter located on a 07?
The oil filter on the 2007 Chevy Impala is located on the side of the oil pan. The engine oil inside the oil pan needs to be completely drained from the oil pan before removing the oil filter from the oil pump.
What kind of oil does a 2007 Chevy Cobalt use?
SAE 5W-30
Engine Oil SAE 5W-30 is preferred.
What kind of oil does a Chevy Cobalt use?
Engine Oil
| Viscosity: | 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 5 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
How do you reset the oil life on a 2007 Chevy Cobalt?
How to Reset Oil Life: Chevrolet Cobalt 2005-2010
- 1-Turn the ignition to run (second position)
- 2-Press the INFO button to scroll until the Oil Life displays.
- 3-Press the INFO and RESET (arrow) buttons at the same time to display OIL LIFE RESET.
- 4-Press and hold the ENTER (arrow) button until the cluster shows AKNOWLEDGED.
What kind of oil does a 2007 Silverado take?
Engine Oil
| Viscosity: | 0W-30 (Below -29) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
What is SAE 5W-30 oil?
5W-30 oil is the lead viscosity recommendation by automakers over the past four decades for use in many vehicle types – passenger cars, SUVs, light vans and trucks – including those with high-performance turbo-charged and supercharged engines.
Does a Chevy Cobalt use synthetic oil?
Typically, Chevy’ll have A5W-30 synthetic lubricant installed in its vehicles out of the factory, and the 2.2L engine will top out at a little over 5 quarts, including the filter. …
How do you reset the computer on a Chevy Cobalt?
To reset the computer disconnect both cables from Your battery and place them together. This will allow all the electricity stored in the system to drain out. You will want to allow them to be disconnected for at least ten minutes. This usually will fix the computer system and allow it to completely reboot.